Vinotheque Wine Cellars

// Home / WhisperKOOL / WhisperKOOL Extreme Series

wine cellars
wine storageWine Cooling & Wine Storage Systems: Protecting Your Investment In Fine Wines wine storage homeAbout Wine CellarsWine cellar helpContact Vinotheque

 

WhisperKool
wine caveSplit Systemwine cooler
wine chillerWhisperKOOL XLT Serieswine stuff
storing wineHow to Build a Wine Cellarcustom wine cabinets
wine storingWine Cellar Gallerywine tips
save wineFAQ’sprotect wine
wine storageCustomer Servicewine cellars

wine cellar
Vinotheque Cabinets
Wine Cellar Doors

Wine Cellar Service
Locate a Distributor
Wine Club
Distributor Login

 
WhisperKOOL® Extreme Series Cooling Units
Introduction | Features & Benefits | Specifications | Pricing | Ducting | Terms & Conditions/Warranty
Ducting the exhaust
  • Venting the heat away from the rear of the unit is the most critical and overlooked challenge with self contained cooling units.
  • Ducting the exhaust side to a separate area will maximize performance.
  • Image shows ducting the exhaust into a ceiling area.
Documentation:
WhisperKOOL Extreme Features
View an Online Presentation
How to Build a
Wine Cellar
View the interactive presentation online
Brochure
Download Extreme Series Brochure (474kb, PDF)
Owner's Manual:
Extreme 4000

Download Extreme 4000 Owner's Manual (750kb, PDF)
Owner's Manual:
Extreme 8000

Download Extreme 8000 Owner's Manual (490kb, PDF)
Fully ductable system
Attic mounted system

Unit can be mounted into an attic space.

Ducting into (cold air) and out of (return air) the cellar on the evaporator side of the cooling unit.

Ducting air to the condenser intake from an adjacent room (must have fresh air source).

While ducting the condenser exhaust (hot air) out of the attic to the outside.
Mounted in adjacent room

The unit can be mounted in an adjacent room and ducted into the cellar.

In this scenario, customer must purchase the remote control unit so the controls can be mounted in the cellar.

By utilizing a few 90 degree ducted elbows, the units noise will be diminished considerably offering the quietest operation.

It is critical to the performance of the unit that the adjacent room has ventilation and a fresh air intake to allow the heat produced on the condenser side to dissipate effectively.
Remote control option
  • Used when mounting the cooling unit in an inaccessible area.
  • Bottle probe must be installed in the cellar.
  • Comes in 20 or 40 foot cable lengths.
  • Remote is offered as part of a system and cannot be added after the fact.
Ducting details

Q: How long can the duct be?
A: The longer the duct work, the more air is restricted and air flow reduced.
We recommend 25 feet of flexible duct work to and from the unit as the maximum length.

Q: What size ducting should be used?
A: 4000 Extreme series 8” ducting to and from the unit.
8000 Extreme series, 8” or 10” ducting to and from the unit.



Ducting questions :

Q: How many 90 degrees turns can be used in the duct?
A: 90 degree bends will slow airflow. We recommend as few as possible, but you can use two or three on each side.

Q: What kind of ducting should be used?
A: Use rigid or flex ducting. Preferably rigid on 90 degree bends to avoid kinking the duct. Use Insulated ducting for evaporator. Use Non insulated ducting for condenser.
Exterior grill (optional)
  • Required when the condenser side is exposed to the outside elements.
  • Removal of standard grille is necessary.
  • Simple to secure using 4 screws provided.
  • Space available for mounting condensate line and outside electrical cord.
How much noise does the unit make?
  • 68 decibels at three feet directly in front of the unit
  • Quietest when remote mounted with ducting through at least one 90 degree turn

Warranty
  • Standard Two years parts, labor and shipping.
  • Factory replacement will be sent out if a problem occurs under warranty (certain procedures apply).
  • Installation and removal are not covered under warranty.
  • Please refer to complete warranty located in the owner's manual.
  • Extended warranty available!

Extended warranty
Extend your warranty another two years for a total of four years, at no additional cost By:
  • Completing an installation questionnaire. To assure all aspects of installation are done correctly
  • Send in pictures showing the proper ventilation of the exhaust. Seeing is believing
Condensate management
  • These units are more powerful than the XLT series, therefore they will initially generate larger volumes of condensate.
  • Too much for a heater system to handle in high humidity areas.
  • Therefore as a safeguard, the drain-line must be utilized.
  • Optional condensate pump available.
Ordering
Product identification
  • 4000 or 8000 Extreme
  • 4000 or 8000 Extreme w/ Remote Thermostat 20 Foot Cord
  • 4000 or 8000 Extreme w/ Remote Thermostat 40 Foot Cord
Options:
  • Louvered Exterior grille
  • Ducting Kit (Per side)
  • Condensate pump kit
Details
  • Prices are subject to change
  • Prices do not include shipping costs
  • Units purchased in California are subject to California sales tax

  • Remote Thermostat must be ordered with original unit
  • Remote Thermostat cannot be sold separately
  • Remote Thermostat required when cooling side is being ducted
Sales Literature and promotional material

PowerPoint presentation Online:
  • Sales Promotion
  • Installation guide
  • For customer service
Extreme printed fliers

WhisperKOOL brochure will all products listed out (soft copy)
<< Back